Sensors for 2021 Jeep Gladiator
Mopar Before NOX SENSOR. Pre Selective Catalytic Reduction (SCR)
Mopar Hex Head Bolt And Coned Washer
M8X1.25X20.00. Engine Oil Cooler Tubes To Cylinder Block 04/29/2013 And After Early Version Used Two Bolts
Mopar Includes Rubber Hoses, Clamps, Quick Connect Fittings and Mounting Bracket. Also See Group 008-615 for More Exhaust Sensors
Mopar Hex Head Bolt
M6x1.00x30.00. Harmonic Balancer Cover To Cylinder Block
Mopar Charge Air Cooler Inlet Duct. Charge Air Cooler Inlet Duct
Mopar Hex Head Bolt And Coned Washer
M8X1.25X20.00. Engine Oil Cooler Tubes To Cylinder Block 04/29/2013 And After Early Version Used Two Bolts
Mopar Hex Nut And Washer
M6x1. Engine Oil Level Indicator Tube
Mopar Includes Rubber Hoses, Clamps, Quick Connect Fittings and Mounting Bracket. Also See Group 008-615 for More Exhaust Sensors
Mopar Before NOX SENSOR. Pre Selective Catalytic Reduction (SCR)
Mopar M6X1.00X25.00. Center Fascia Support Bracket To Deck Panel. Center Fascia Support Bracket To Deck Panel
Mopar Hex Flange Head Bolt
M6x1.00x14.00. Adapter Plate To Knuckle
Mopar Hex Flange Head Bolt, Right
M6X1.00X25.00. Rear Main Crankshaft Oil Seal Retainer To Cylinder Block
Mopar Screw
M4X1.79X16. Part Included With #13 Air Cleaner Cover. MAF Sensor to Airbox
Mopar Tire Pressure Sensor, Spare Tire
Single Sensor Only, Cap Serviced with Sensor Only
Mopar Seat Position Sensor
Driver. Front Passenger. Right or Left.
Mopar Bracket Included. Battery temp. Overhead Console.





















